Double Table TM2480-2 PVC Vacuum Membrane Press Machine for Plywood
Double Table TM2480-2 PVC Vacuum Membrane Press Machine for Plywood Double Table TM2480-2 PVC Vacuum Membrane Press Machine for Plywood Double Table TM2480-2 PVC Vacuum Membrane Press Machine for Plywood Double Table TM2480-2 PVC Vacuum Membrane Press Machine for Plywood

Double Table TM2480-2 PVC Vacuum Membrane Press Machine for Plywood

type: hot vacuum press
Application: Woodworking for pvc door ,cabinet
Pressure: -0.7-0.1 Mpa
Warranty: 2 Years
Voltage: 380V three-phase four-wire .or do as your request
Power(W): 5KW
Working table Size :2500×1300(1100)×60mm
Weight: 1600kg
Certification: CE

Double Table TM2480-2 PVC Vacuum Membrane Press Machine for Plywood

1. Double Table TM2480-2 PVC Vacuum Membrane Press Machine for Plywood

Features:

1. This machine has 2 work table.The working plate is fixed while the heating cabinet is movable.

2. The vacuum is measured with vacuometer automatically. The temperature is controlled by computer chips so that the heating speed is adjustable and the temperature can be perfectly managed.

3. This machine uses top 2X series vacuum pump. It is stable and reliable and the maintenance work is simple. (You can also opt for German-made vacuum pump, which is strong and tough).

 

1.Stainless heating elements can heat evenly and improve the efficiency.

2.Double layer thermal preservation and full sealing design can save energy.

3.Special steel plate worktable is proof against high temperature and corrosion.

4.Vacuum pump of high quality is efficient, stable and durable.

5.Advanced digital technology can make sure of high level of automation and easy operation.

 

 

2.Applications 
Widely ues in funiture ,indoor , Kitchen Cabinet Door ,window,lath,sliding door and so on.

membrane press machine CE

Function

Vacuum press machine can be used to cover PVC on the surface of the craft compound door, furniture, cabinet and sound box and to cover veneer and thermal transfer membrane on single side of the door panel and furniture with the silicon membrane provided by our company.
 

Characteristics:

1. Design unique, innovative, easy to operate.

2. The high degree of automation, installation easy, simple operation, easy to learn.

3. Saving energy. This machine use near-infrared heating pipe, heating fast and temperature higher. Thereforeitsolves the problem of long time of pre-heating, and saves 30 minutes waiting time.

4. Direct Connect vacuum pump, low noise, small size, high technology content.

3.vacuum membrane press machine video 
1) Automatic vacuum membrane press machine video 


2) Manual vacuum membrane press machine video 





4.Package and Shipment.


1 size 8700*1700*1500
2 vacuum pressure: 0.095mpa.
3 workbench size 2500*1100 (mm).
4 air tank capacity: 267.5 ml.
Advantages of Double Table TM2480-2 PVC Vacuum Membrane Press Machine for Plywood:
Save time. No need of adjusting pinch roller. Like. Wrapping machine. Frequently. Save wires. The worktable work in and out, the heating system is stable. No blister. The hot-pressed lamination can guarantee quality, Easy to operate. General workers can operate it within. A few hours training. Configuration and parameter.
Configuration of Double Table TM2480-2 PVC Vacuum Membrane Press Machine for Plywood .
1. Vacuum pump xd-63.
2. With far-infrared heating and cnc heating system, the machine can work well within three minutes.
3. Automatic pressure system can adjust working pressure at any time.
4. Air tank capacity: 267.5 (ml).
Parameter of Double Table TM2480-2 PVC Vacuum Membrane Press Machine for Plywood 
1. Overall size 8700*1700*1500 (mm).
2. Workbench size 2500*1100 (mm).
3. In-and-out mode: workbench sliding.
4. Discharge capacity of vacuum pump: 20 (l).
5. Vacuum pressure: 0.095mpa.
6. Max. Machining height: 70 (mm).
7. Gross power: 25.5 (kw).
8. Overall weight: 1.85 (t).
Function of  Double Table TM2480-2 PVC Vacuum Membrane Press Machine for Plywood
1. Pvc paint-free door film lamination.
2. Wood-plastic door laminating heat-transfer film and pvc film.
3. Straw door laminating heat-transfer film and pvc film.
4. Edge line laminating pvc film for three faces at one time. Plc for time temperature and pressure control. Vacuum pump. The cabinet board. The pvc film. With far-infrared heating and cnc heating system, the machine can work well within three minutes.
RFQ :

1) Q: What's the MOQ?
A: MOQ is one set.
2) Q: Provide custom machine Yes or No?
A: Yes. We can provide custom machine for clients.
3) Q: What's the payment terms?
A: T/T 30% in advance and balance before shipment or by negotiation.
4) Q: Are you factory or trade company?
A: We are factory and trade company. LMTECH is our brand.
5) Q: How long is the warranty period?
A: One year warranty period except the quick-wear parts.
6) Q: Do you have professional engineers?
A: Yes. We have professional engineers and designers. We can provide OEM products.

More detail information of Pvc Furniture Kitchen Cabinet Door Membrane Press Making Machine,please kindly feel free to contact with us. 
 

Inquiry Product

Your Name

Your Email

Your Message

Related Products